• Dishwasher Repair: Why Your Dishes Aren’t Coming Out Clean

    Dishwasher Repair: Why Your Dishes Aren’t Coming Out Clean

    It’s frustrating to open the dishwasher and find spots, food residue, or cloudy film still clinging to what should be clean dishes. Before replacing the appliance or relying on hand-washing everything, it’s important to identify why your dishwasher isn’t performing the way it should. In many cases, the cause is simple and fixable with a few adjustments or minor repairs. At Ace’s Appliance Repair, we’ve worked with homeowners and businesses for over 20 years to solve issues just like this with reliable dishwasher repair service in Keller, TX.

    Common Reasons Your Dishwasher Isn’t Cleaning Properly

    There are several reasons for your dishwasher may be leaving dishes dirty, even if the cycle appears to complete normally. Some problems are related to water flow or temperature, while others point to mechanical or maintenance issues. Watch for these common causes:

    • Clogged spray arms that can’t distribute water evenly
    • A dirty or full filter that prevents water from draining
    • Low water temperature that fails to dissolve food and detergent
    • Detergent buildup in the dispenser or using the wrong type of detergent
    • Overloading or improper loading that blocks water from reaching all items
    • A worn-out or broken inlet valve that restricts water supply

    DIY Fixes Before Calling a technician

    While some issues require professional attention, there are a few basic checks you can do on your own before scheduling a dishwasher repair service. These simple steps can improve performance and rule out common issues. Start with the following:

    • Clean the spray arms by removing them and rinsing out any debris.
    • Check the filter for trapped food particles and rinse it thoroughly.
    • Run hot water in the sink before starting a cycle to ensure the dishwasher fills with hot water.
    • Use a dishwasher-safe cleaner to remove grease or mineral buildup from the interior.
    • Make sure dishes aren’t stacked too close together or blocking the detergent dispenser.

    Preventive Maintenance Tips

    Regular maintenance goes a long way toward keeping your dishwasher running at full capacity. A well-maintained appliance lasts longer, performs better, and is less likely to need frequent repair. Here are some key habits to incorporate:

    • Scrape off large food particles before loading dishes (but avoid pre-rinsing completely).
    • Run a monthly cleaning cycle using a dishwasher cleaner or white vinegar.
    • Inspect and clean the spray arms every few months.
    • Wipe down the door seal and edges to prevent mold and mildew.
    • Avoid using too much detergent, especially with soft water.

    If your home or business uses a high-capacity unit, preventive care is even more important. We also offer commercial dishwasher repair for restaurants and other facilities with heavy daily use.

    When to Seek Professional Help

    Even with proper use and maintenance, dishwashers can develop mechanical or electrical problems over time. If you’ve tried all the basic fixes and your dishes still come out dirty, it may be time to call a qualified dishwasher repair technician. Ignoring these problems can lead to further damage and higher repair costs. Our experienced technicians can diagnose the issue and complete the necessary appliance repair before it worsens. Professional service is recommended when:

    • The dishwasher won’t fill with water or doesn’t drain.
    • The heating element isn’t working, and dishes come out cold or wet.
    • Cycles stop midway, or the control panel malfunctions.
    • Water leaks from underneath or around the door.
    • You hear grinding, buzzing, or humming noises during operation.

    Our team services all major brands and models, and we carry the parts and tools needed to handle most jobs in a single visit. Our dishwasher repair service is designed to get your kitchen back in working order quickly and reliably.

    Schedule Dishwasher Repair in Keller, TX

    If your dishwasher isn’t cleaning like it used to, let our team help. Contact Ace’s Appliance Repair in Keller, TX, today to schedule a service appointment with one of our experienced technicians. We’ll restore your dishwasher’s performance so you can stop rewashing dishes and start enjoying a more efficient kitchen.

  • Troubleshooting Tips to Drop the Temperature of Your Freezer

    Troubleshooting Tips to Drop the Temperature of Your Freezer

    When your freezer isn’t staying cold enough, it can lead to food spoilage, frost buildup, and rising energy bills. Freezers should consistently maintain a temperature of 0°F to preserve food safely. If your appliance is struggling to stay within that ideal freezer temperature range, it’s important to act fast. Even a few degrees too warm can put your food at risk. At Ace’s Appliance Repair in Keller, TX, we help homeowners troubleshoot and fix common freezer problems before they become costly repairs. With over 20 years of experience, we know how to quickly identify issues that affect freezer temperature and restore efficiency.

    Common Signs of Freezer Problems

    If your freezer temperature is higher than it should be, you’ll usually notice one or more obvious symptoms. These signs can signal anything from poor airflow to mechanical failure. Identifying them early helps prevent further damage and keeps your appliance running longer. Look for the following issues:

    • Food partially thawing or softening unexpectedly
    • Frost buildup on walls, shelves, or the freezer door
    • Unusual noises such as buzzing, clicking, or grinding sounds
    • Condensation or puddles near the freezer
    • A compressor that runs constantly without cycling off

    Improve Airflow

    Blocked airflow is a common cause of rising temperatures in both upright and chest freezers. Cold air must be able to circulate freely around the interior to keep contents at a safe and even temperature. If vents are blocked, some areas of the freezer may become too warm while others freeze over. Proper airflow also helps prevent the motor from overworking, which can extend the life of the appliance. To improve airflow inside your freezer:

    • Avoid overfilling the freezer, which can restrict air circulation.
    • Keep vents at the back of the freezer clear of stored food.
    • Arrange items loosely to prevent tight packing.
    • Do not block the evaporator fan with large containers.

    Clean the Coils

    The condenser coils release heat from the freezer’s internal system, and when they’re coated in dust or debris, heat can’t dissipate properly. This puts strain on the compressor and may cause the freezer to run hotter than intended. Cleaning the coils is one of the simplest ways to help your unit drop to the correct temperature. We recommend doing this at least twice a year to maintain consistent performance. You can clean your freezer’s coils by following these steps:

    • Unplug the appliance before starting.
    • Locate the coils, typically behind or beneath the unit.
    • Use a coil brush or vacuum with a narrow nozzle to remove dust.
    • Clean the surrounding area to reduce future buildup.

    Defrost if Needed

    Excessive frost buildup inside the freezer can insulate key components and prevent cold air from moving effectively. Even if your model has an automatic defrost system, ice can sometimes build up in areas it doesn’t reach. Manually defrosting your freezer can give it a fresh start and restore ideal function. To safely defrost:

    • Move contents to a cooler or another freezer.
    • Turn off the appliance and leave the door open.
    • Place towels to catch melting water.
    • Wait for the ice to melt naturally—avoid using sharp tools.

    Once defrosted, wipe the interior dry, power the unit back on, and allow several hours for it to return to the average freezer temperature.

    Inspect the Fan and Compressor

    Your freezer relies on two major components to keep temperatures low: the evaporator fan and the compressor. If either of these begins to fail, your freezer may not maintain the cold environment required for safe storage. These parts are complex and often require service from a trained freezer repair technician. A professional can test the components and replace any that are no longer functioning properly. Here are signs that these components may need attention:

    • The evaporator fan isn’t running or is making loud noises.
    • The compressor is hot to the touch or running constantly.
    • The back of the freezer is unusually warm.
    • The freezer cools slowly or not at all.

    Check the Temperature Sensor

    The temperature sensor tells your freezer when to turn the cooling cycle on and off. If this sensor is misreading or damaged, it can result in inconsistent or incorrect temperatures. To check this:

    • Make sure your temperature setting hasn’t been accidentally adjusted.
    • Use an appliance thermometer to compare the actual temperature with the display reading.
    • If the numbers don’t match or if the unit doesn’t respond to setting changes, the sensor may need replacement.

    When to Seek Professional Help for Freezer Repair

    Sometimes, troubleshooting only gets you so far. If your freezer still isn’t holding the correct temperature after basic maintenance, there may be a more complex issue at play. Our freezer repair technicians in Keller, TX, are equipped to handle everything from minor part replacements to full system diagnostics. Delaying freezer repair can lead to food waste, increased energy use, or permanent damage to the appliance. Professional help is likely needed when:

    • The freezer won’t cool even after cleaning and defrosting.
    • There’s visible damage to internal components or wiring.
    • Your unit is more than 10 years old and showing signs of wear.
    • Strange noises continue after all visible problems are addressed.

    Schedule Freezer Repair in Keller, TX

    If your freezer isn’t staying as cold as it should, don’t wait until food starts to spoil. Contact Ace’s Appliance Repair in Keller, TX, today. We’ll send an experienced freezer repair technician to inspect your unit and make any needed repairs.

  • Genius Tips to Extend Your Oven’s Lifespan

    Genius Tips to Extend Your Oven’s Lifespan

    Ovens are one of the most essential appliances in any home, and at Ace’s Appliance Repair, we understand how important it is to keep yours working efficiently for as long as possible. With over 20 years of experience in appliance repair in Keller, TX, we’ve seen firsthand how simple habits and preventive maintenance can drastically increase your oven’s performance and longevity. The average lifespan of an oven ranges from 13 to 15 years, but with the right care, it can last even longer.

    Why Oven Maintenance Matters

    Routine maintenance isn’t just about preventing breakdowns. It helps ensure your oven cooks evenly, operates efficiently, and stays safe. Over time, grease, food debris, and worn components can cause poor heating or even lead to fire hazards. Addressing small issues early through regular upkeep or timely oven repair can save you from needing a full replacement.

    Understand Your Oven

    Whether you have a standard model or a high-end electric unit, knowing how your appliance works makes a big difference in how you care for it. Understanding your oven’s functions, typical wear points, and model-specific features allows you to spot early signs of trouble and better maintain performance. Here are a few ways to get to know your oven better:

    • Read the manufacturer’s manual and take note of maintenance instructions.
    • Learn the difference between convection and conventional settings.
    • Understand the heating cycle and how it should function during normal use.

    Regular Cleaning

    Grease buildup and leftover food can reduce efficiency and even damage internal parts. Regular cleaning helps your oven perform better and extends its lifespan. It also improves safety by reducing the risk of smoke and fire. Follow these cleaning tips to keep your oven in good shape:

    • Wipe spills after each use, especially on the door and racks.
    • Use damp cloth or gentle cleaner weekly to clean interior surfaces.
    • Running a self-cleaning cycle only as often as recommended overuse can stress components.
    • Avoid using harsh chemicals that can damage seals or sensors.

    Check and Maintain Components

    Ovens rely on a series of mechanical and electrical components that wear out over time. Keeping these parts in working order is key to preserving your oven lifespan. Ignoring failing components can put strain on the system and lead to more serious issues. Our oven repair service includes diagnosing these problems and replacing parts as needed, which is a cost-effective alternative to replacing the entire appliance. We recommend regular checks for:

    • Door seals that are cracked or loose, which can cause heat loss
    • Heating elements that are slow to warm up or visibly damaged
    • Thermostats that cause inaccurate temperatures
    • Control panels or knobs that are unresponsive or intermittent

    Avoid Common Mistakes

    Many homeowners unintentionally shorten the life of their oven by misusing it. Small errors in everyday use can lead to damage that builds up over time. Avoid the following to help preserve your electric oven lifespan:

    • Slamming the oven door, which can misalign hinges and seals
    • Using aluminum foil on the bottom of the oven, which can block airflow and damage heating elements
    • Ignoring strange smells or sounds, which often signal repair needs
    • Overloading oven racks, which can affect airflow and cause uneven cooking

    The Benefits of Preventive Maintenance

    Instead of waiting for a problem to surface, schedule regular service checks to keep everything running smoothly. Our technicians are trained to spot early warning signs and perform routine tune-ups that reduce the risk of major failures. For many households, the oven is used almost daily. That heavy use makes maintenance even more important if you want to get the most out of your investment. Benefits of preventive maintenance include:

    • Improved energy efficiency
    • Even and reliable cooking performance
    • Extended time between replacements
    • Lower repair costs over time

    Need Help? Call the Experts in Oven Repair in Keller, TX

    At Ace’s Appliance Repair, we’re committed to helping you protect your home appliances and save money in the long run. Whether it’s routine maintenance or a complex repair, our local oven repair service ensures your appliance stays in top condition. We bring over two decades of hands-on experience, and we treat every call like a priority. Contact us today and let our team help you extend the life of your oven with expert service and reliable care.

n